ZIG-POEWP-100TX
DISCONTINUED
HDMI & VGA Auto Switching Wallplate
A perfect “no-control needed” technology
[smartslider3 slider=”24″]
BYOD and in seconds collaborate with your colleagues with full audio and video in stunning 4K UHD. A must for conference rooms and huddle spaces.
ZIG-POEWP-100TX – HDMI/VGA Auto-switching wall plate, HDBaseT transmitter over single CAT5e/6 cable up to 100 meters. ZIG-POEWP-100TX can be used stand-alone as an HDBaseT wall-plate transmitter, but really shines when paired with the ZIG-RXAV-100 receiver & audio amplifier. A perfect “no-control” control system using “on-connection” technology to fire up projectors, drop screens and control lighting in small rooms.
- ULTRA HD 4K Certified HDBaseT Extender
- Auto-switching wall-plate.
- HDMI and VGA w/Audio inputs – VGA can be configured as Component, Y/C or C.
- HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
- HDCP 1.4 / 2.2 /2.3
- Autonomous EDID management
- Supports HDR
- Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
- Supports CEC pass-through
- RJ-45 ports support HDBaseT up to 330-feet / 100-meter for 1080p
- RJ-45 ports support HDBaseT up to 230-feet / 70-meter for 4K
- 48V IEEE POE – remote or source
- ZigNet setup and control – or control from ZIG-RXAV-100 hand-held remote simple automation or integrate into 3rd party controller.
- The wall plate auto switching is based on sensing the +5V signal from the HDMI source or from the VGA source. This is the activity signaling pin.
video
Signal IN
HDMI Connector
Signal IN
VGA Connector
Extension Transport
HDBaseT
Max. Resolution
HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
HDCP
1.4 / 2.2 / 2.3
EDID
Autonomous EDID mangement
HDR
Yes
Maximum Throughput
10.2-GBPS
audio
Signal IN
3.5mm stereo jack follows VGA port
General
ESD Protection
Human body model: ±8kV (air-gap discharge), ±4kV (contact discharge)
Cable Distance
100-M (Max.) for 1080p
Cable Distance
70-M (Max.) for 4K
AUDIO Support
Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
Control
Supports dual voltage IR 5-volt / 12-volt
Power source
48V IEEE POE – remote or source
Secondary Power Source
Aux Phoenix 5-VDC (If used with 3-rd party receiver)
HDBaseT
RJ-45 – port is dual use. Can be used as an Ethernet port when programming or controlling the device.
Wall Mountable
Yes – 2 Gang Decora Style
ZigNet Diagnostics
Yes
ZIG-POEWP-100Tx Diagram
- 1 x ZIG -POEWP-100Tx
- 1 x User Manual
- 1 x Phoenix connecting block
- 4 x captive screws
Key Features
- ULTRA HD 4K Certified HDBaseT Extender
- Auto-switching wall-plate.
- HDMI and VGA w/Audio inputs – VGA can be configured as Component, Y/C or C.
- HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
- HDCP 1.4 / 2.2 /2.3
- Autonomous EDID management
- Supports HDR
- Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
- Supports CEC pass-through
- RJ-45 ports support HDBaseT up to 330-feet / 100-meter for 1080p
- RJ-45 ports support HDBaseT up to 230-feet / 70-meter for 4K
- 48V IEEE POE – remote or source
- ZigNet setup and control – or control from ZIG-RXAV-100 hand-held remote simple automation or integrate into 3rd party controller.
- The wall plate auto switching is based on sensing the +5V signal from the HDMI source or from the VGA source. This is the activity signaling pin.
Specification
Video
Signal IN
HDMI Connector
Signal IN
VGA Connector
Extension Transport
HDBaseT
Max. Resolution
HDMI 1.4 (4096×2160@24 Hz (YUV 4:4:4, 8-bit)
HDCP
1.4 / 2.2 / 2.3
EDID
Autonomous EDID mangement
HDR
Yes
Maximum Throughput
10.2-GBPS
Audio
Signal IN
3.5mm stereo jack follows VGA port
General
ESD Protection
Human body model: ±8kV (air-gap discharge), ±4kV (contact discharge)
Cable Distance
100-M (Max.) for 1080p
Cable Distance
70-M (Max.) for 4K
AUDIO Support
Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus DTS HD-Master and more.
Control
Supports dual voltage IR 5-volt / 12-volt
Power source
48V IEEE POE – remote or source
Secondary Power Source
Aux Phoenix 5-VDC (If used with 3-rd party receiver)
HDBaseT
RJ-45 – port is dual use. Can be used as an Ethernet port when programming or controlling the device.
Wall Mountable
Yes – 2 Gang Decora Style
ZigNet Diagnostics
Yes
Downloads
Diagrams
ZIG-POEWP-100Tx Diagram
Typical Applications:
Conference rooms, boardrooms, huddle rooms for trimming out display/projector HDMI connection.
Residential trim out
Industrial environments for connection to remote displays
Extending HDMI 4K for 70 meters over single CAT5/6/7
Package Content
- 1 x ZIG -POEWP-100Tx
- 1 x User Manual
- 1 x Phoenix connecting block
- 4 x captive screws
Gallery
RELATED PRODUCTS
ZIG-HVX-100
ZIG-POEWP-RX70
ZIG-CX-100
ZIG-HVX-100R