Connect DB9 RS232 connector and select terminal parameters 115200 bps, 8N1, no handshake

Each SW41 product can be individually controlled using the serial number as below:
@sw41-0001 help

will print the help for the specific @sw41-0001 serial number device. The four numbers are the last four numbers of the product serial number.

To address any sw41 device, remove the serial number part from the command. Use as below:
@sw41 help

will print the help for any sw41 connected



RS232 Control Commands:

help: print this summary
  usage: help 

disco: Ukko Discovery
  usage: disco 
  returns other zigen ecosystem products if connected

uptime: System uptime
  usage: uptime 

version: Firmware Version
  usage: version 

insel: HDMI Input Selection
  usage: insel <1|2|3|4>

st: Get Device Status
  usage: st 

man: Display Device Info
  usage: man 

power: power ZIG-SW41 on/off
  usage: power <on|off>




Examples:

@sw41-0055 power off

Will turn off the power for sw41-0055 device


@sw41 power off

will turn off power to any sw41 connected


@sw41 insel 3

will select the HDMI input 3 for the connected sw41 device